NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2022027067 Registration Date: 8/25/2022
PROJECT
- Project Name:
- AMAT B30 Cleanroom Conversion - Phase 1
- Project Number:
- TABS2022027067
- Facility Name:
- Applied Materials
- Location Address:
- 9700 US 290
- Austin, TX 78724
- Location County:
- Travis
- Start Date:
- 11/7/2022
- Completion Date:
- 3/30/2023
- Estimated Cost:
- $6,000,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Conversion of existing warehouse space into an ISO 7 (Class 10,000) cleanroom with a small ISO 6 (Class 1,000) cleanroom within it. Phase 1 will be separated from Phase 2 (design in progress) by a temporary cleanroom partition.
- Square Footage:
- 26,250 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Nick Angelo
RAS
- RAS Name:
- MARK S,ROBINSON
- RAS #:
- 1561
- RAS Address:
- PO BOX 9063
- AUSTIN, TX 78766
- RAS Phone:
- (512) 905-6005
OWNER
- Owner Name:
- Applied Materials
- Owner Address:
- 9700 US 290
- Austin, Texas 78724
- Owner Phone:
- (512) 272-0747
- Contact Name:
- Arturo Soto
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Fuse Architecture Studio
- Design Firm Address:
- 1005 East St. Elmo Road Building 4
- Austin, Texas 78724
- Design Firm Phone:
- (512) 992-1520
