NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2023000015 Registration Date: 9/1/2022
PROJECT
- Project Name:
- ESAB Welding Lab
- Project Number:
- TABS2023000015
- Facility Name:
- ESAB
- Location Address:
- 2800 Airport Road
- Denton, TX 76207
- Location County:
- Denton
- Start Date:
- 9/6/2022
- Completion Date:
- 11/30/2022
- Estimated Cost:
- $200,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Convert a compressor storage room into a welding lab
- Square Footage:
- 800 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Project Registered
PERSON FILING FORM
- Contact Name:
- Craig Senglin
RAS
Not Assigned
OWNER
- Owner Name:
- New Mountain Capital
- Owner Address:
- 1633 Broadway, 47th Floor
- New York, New York 10019
- Owner Phone:
- (212) 655-0127
- Contact Name:
- Kellie Steele
TENANT
- Tenant Name:
- Matthew Tanner
- Tenant Phone:
- (940) 205-8044
DESIGN FIRM
- Design Firm Name:
- E-W Associates
- Design Firm Address:
- 275 Tealwood Drive
- Coppell, Texas 75019
- Design Firm Phone:
- (214) 729-6696
