NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2023005126 Registration Date: 11/10/2022
PROJECT
- Project Name:
- NXP W&E Building UPS Infrastructure Install Design
- Project Number:
- TABS2023005126
- Facility Name:
- Oak Hill W&E Building
- Location Address:
- 6501 William Cannon Drive
- Austin, TX 78735
- Location County:
- Travis
- Start Date:
- 11/11/2022
- Completion Date:
- 12/2/2022
- Estimated Cost:
- $450,000
- Type of Work:
- Additions to Existing Building
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Expand DAIR capacity on BLDG-E, Level 2, Test Floor.
- Square Footage:
- 3,000 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Max Genet
RAS
Not Assigned
OWNER
- Owner Name:
- NXP
- Owner Address:
- 6501 William Cannon Dr.
- Austin, Texas 78735
- Owner Phone:
- (512) 694-8476
- Contact Name:
- Nicolas Gardiner
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Fuse Architecture Studio
- Design Firm Address:
- 1005 E St Elmo Road Building 4
- Austin, Texas 78745
- Design Firm Phone:
- (512) 992-1520
