NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2023006342 Registration Date: 11/29/2022
PROJECT
- Project Name:
- NXP Modify H-1616 for TEM-02 Install - Oak Hill
- Project Number:
- TABS2023006342
- Facility Name:
- NXP Building H-1616
- Location Address:
- 6501 William Cannon Drive
- Austin, TX 78735
- Location County:
- Travis
- Start Date:
- 11/30/2022
- Completion Date:
- 1/31/2023
- Estimated Cost:
- $300,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- MODIFY H-1616 TO ALLOW FOR THE INSTALLATION OF NEW TRANSMISSION ELECTRON MICROSCOPE (TEM-02). RECONFIGURE WALL LAYOUT, ADD DOORS, MODIFY DROP-CEILING GRID, LIGHTING AND HVCAC.
- Square Footage:
- 2,500 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Max Genet
RAS
- RAS Name:
- MARK S,ROBINSON
- RAS #:
- 1561
- RAS Address:
- 8213A SHOAL CREEK BLVD STE 102
- AUSTIN, TX 78757
- RAS Phone:
- (512) 905-6005
OWNER
- Owner Name:
- NXP Semiconductors
- Owner Address:
- 6501 William Cannon Dr.
- Austin, Texas 78735
- Owner Phone:
- (512)895-6900
- Contact Name:
- Howard Estepp
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Fuse Architecture Studio
- Design Firm Address:
- 1005 E St Elmo Road Building 4
- Austin, Texas 78745
- Design Firm Phone:
- (512) 992-1520
