NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2023006803 Registration Date: 12/6/2022
PROJECT
- Project Name:
- RSWB Shell Building & Capstone Mechanical Finish-out
- Project Number:
- TABS2023006803
- Facility Name:
- TBD
- Location Address:
- 1201 W. Hwy. 190
- Belton, TX 76513
- Location County:
- Bell
- Start Date:
- 2/1/2023
- Completion Date:
- 12/29/2023
- Estimated Cost:
- $2,750,000
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Construction of a new 14,000 sf shell building with approximately 2,700 sf finished out for new satellite office and shop for Capstone Mechanical.
- Square Footage:
- 14,000 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Richard Morgan
RAS
Not Assigned
OWNER
- Owner Name:
- RSWB Partners, LLC
- Owner Address:
- 8004 Woodway Dr. Suite 100
- Waco, Texas 76712
- Owner Phone:
- (254) 379-4422
- Contact Name:
- Rick Tullis
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- K4 Construction
- Design Firm Address:
- 1768 Greig Drive
- Robinson, Texas 76706
- Design Firm Phone:
- (254) 662-9311
