NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2023007175 Registration Date: 12/9/2022
PROJECT
- Project Name:
- Mixing Expansion
- Project Number:
- TABS2023007175
- Facility Name:
- Bridgestone-Bandag
- Location Address:
- 4750 FM 18
- Abilene, TX 79602
- Location County:
- Taylor
- Start Date:
- 2/1/2023
- Completion Date:
- 1/31/2024
- Estimated Cost:
- $24,500,000
- Type of Work:
- Additions to Existing Building
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- The scope consists of a bldg. expansion of 56,000 s.f. at the north end of the exist. plant. The purpose of this expansion is additional rubber mixing capacity and raw material staging/storage. Office space will be included (1.8k s.f ) additional.
- Square Footage:
- 57,800 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Erik Mcelwain
RAS
- RAS Name:
- WILLIAM G,GIPSON
- RAS #:
- 1221
- RAS Address:
- 3605 BRANDY RD
- CADDO, TX 76429
- RAS Phone:
- (214) 505-2182
OWNER
- Owner Name:
- Bridgestone Bandag, LLC
- Owner Address:
- 200 4th Avenue S.
- Nashville, Tennessee 37201
- Owner Phone:
- (325) 677-1861
- Contact Name:
- Scot Music
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- CDM Smith, Inc.
- Design Firm Address:
- 165 Smokerise Drive
- Wadsworth, Ohio 44281
- Design Firm Phone:
- (234) 255-6946
