NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2023007310 Registration Date: 12/12/2022
PROJECT
- Project Name:
- SAS GCS Redundancy Projects - FAB2 PH3(15%) H2
- Project Number:
- TABS2023007310
- Facility Name:
- Samsung Austin Semiconductor
- Location Address:
- 12100 Samsung Blvd.
- Austin, TX 78754
- Location County:
- Travis
- Start Date:
- 12/19/2022
- Completion Date:
- 4/30/2024
- Estimated Cost:
- $700,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Installation of new PH3(15%) H2 DVMB in FAB2 Tox/Flam Room. Providing the design for the installation of new process lines from the DVMB to the existing VMBs, approx.. 2,285 linear feet with appurtenances: pneumatic, venturi, purge, and PGV.
- Square Footage:
- 1,000 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Max Genet
RAS
- RAS Name:
- MARK S,ROBINSON
- RAS #:
- 1561
- RAS Address:
- 18704 JANA PATRICE DR
- PFLUGERVILLE, TX 78660
- RAS Phone:
- (512) 459-2121
OWNER
- Owner Name:
- Samsung
- Owner Address:
- 12100 Samsung Blvd.
- Austin, Texas 78754
- Owner Phone:
- (512) 672-3087
- Contact Name:
- Josue Ramon Rivera
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Fuse Architecture Studio
- Design Firm Address:
- 1005 E St Elmo Road Building 4
- Austin, Texas 78745
- Design Firm Phone:
- (512) 992-1520
