NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2023012197 Registration Date: 2/20/2023
PROJECT
- Project Name:
- Alcon Phase 3 Molding Expansion
- Project Number:
- TABS2023012197
- Facility Name:
- Alcon Manufacturing
- Location Address:
- 9965 Buffalo Speedway
- Houston, TX 77054
- Location County:
- Harris
- Start Date:
- 4/3/2023
- Completion Date:
- 8/31/2024
- Estimated Cost:
- $17,670,146
- Type of Work:
- Additions to Existing Building
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- The primary area of work is the Molding room, 9016 SF, located on the first floor inside the existing building and will be renovated warehouse space. 185 SF of open office space will also be renovated on first floor. 597 SF of new electrical will be
- Square Footage:
- 11,040 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Laura Fulkerson
RAS
- RAS Name:
- LAURA,FULKERSON
- RAS #:
- 96
- RAS Address:
- PO BOX 2008
- MASON, TX 76856
- RAS Phone:
- (713) 598-1505
OWNER
- Owner Name:
- Alcon Research, LLC
- Owner Address:
- 9965 Buffalo Speedway
- Houston, Texas 77054
- Owner Phone:
- 817-551-3032
- Contact Name:
- Joe Nottoli
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Jacobs
- Design Firm Address:
- 818 Town and Country Blvd, Suite 500
- Houston, Texas 77024
- Design Firm Phone:
- 214 638 0145
