NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2023013437 Registration Date: 3/6/2023
PROJECT
- Project Name:
- Proposed Hanger #2
- Project Number:
- TABS2023013437
- Facility Name:
- Atlantic Aviation Services Hanger #2
- Location Address:
- 4400 Glenn Curtis Drive
- Addison, TX 75001
- Location County:
- Dallas
- Start Date:
- 6/15/2023
- Completion Date:
- 12/15/2023
- Estimated Cost:
- $6,500,476
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- New 28,600 SF aircraft hangar with attached 2,990 SF Single Story Office
- Square Footage:
- 31,590 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Marcela Rhoads
RAS
Not Assigned
OWNER
- Owner Name:
- Atlantic Aviation Services
- Owner Address:
- 7930 Airport Blvd
- Addison, Texas 77061
- Owner Phone:
- 703-673-6549
- Contact Name:
- Ahed Shaksheer
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- J.R. Miller & Associates
- Design Firm Address:
- 19350 TX - 249, Ste 200
- Houston, Texas 77070
- Design Firm Phone:
- 714-524-1870
