NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2023013613 Registration Date: 3/8/2023
PROJECT
- Project Name:
- cGMP Manufacturing Interior Fit-out
- Project Number:
- TABS2023013613
- Facility Name:
- Texas Technology Park
- Location Address:
- 9300 Kirby Dr,Suite 900
- Houston, TX 77054
- Location County:
- Harris
- Start Date:
- 4/15/2023
- Completion Date:
- 4/15/2024
- Estimated Cost:
- $12,319,157
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- New 22,025 sqft fit out in existing 61536sqft S-1, B Occupancy bldg new 2590sqft mezzanine will be added to allow additional office area. No new add to the original bldg footprint. Fully sprinklered Type II Bldg orig blt to accom high pile rack stora
- Square Footage:
- 24,615 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Attila Huszka
RAS
Not Assigned
OWNER
- Owner Name:
- IND HOUTX TTP Legacy, LLC
- Owner Address:
- 1800 Augusta Dr.4th Floor
- Houston, Texas 77057
- Owner Phone:
- (713) 850-8400
- Contact Name:
TENANT
- Tenant Name:
- LiYing Yang
- Tenant Phone:
- (713) 505-1863
DESIGN FIRM
- Design Firm Name:
- D2 Groups
- Design Firm Address:
- 2540 Renaissance Blvd
- King of Prussia, Pennsylvania 19406
- Design Firm Phone:
- (610) 238-0330
