NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2023021194 Registration Date: 6/12/2023
PROJECT
- Project Name:
- Buckner Warehouse
- Project Number:
- TABS2023021194
- Facility Name:
- G&S Fastener's
- Location Address:
- 4828 S. Buckner Blvd.
- Dallas, TX 75227
- Location County:
- Dallas
- Start Date:
- 6/12/2023
- Completion Date:
- 6/19/2023
- Estimated Cost:
- $125,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Remove walls for store front area, add CMU office. Tape, mud, and paint walls. Add epoxy floor. Replace damage/old ceiling tile.
- Square Footage:
- 1,500 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Rey Lafuente
RAS
Not Assigned
OWNER
- Owner Name:
- Lafuente Framing, LLC
- Owner Address:
- 42828 S BUCKNER BLVD
- DALLAS, Texas 75227
- Owner Phone:
- (214) 471-4436
- Contact Name:
- Rey Lafuente
TENANT
Not Assigned
DESIGN FIRM
Not Assigned
