NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2023022888 Registration Date: 7/5/2023
PROJECT
- Project Name:
- UTSWMC - HA2.146 Spect CT Room
- Project Number:
- TABS2023022888
- Facility Name:
- UT Southwestern Medical Center - POB I; Second Floor
- Location Address:
- 5323 Harry Hines Blvd.
- Dallas, TX 75390
- Location County:
- Dallas
- Start Date:
- 8/15/2023
- Completion Date:
- 11/15/2023
- Estimated Cost:
- $519,200
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project involves public funds, public land, or is a Federally funded roadway project.
- Scope of Work:
- Interior reno of existing space to provide space for Seimen's Spect CT Equipment and a Control Room with demo and construction of interior finishes including floors, wall finishes, ceilings, base and wall cabinets. Plumbing, HVAC and elec. systems
- Square Footage:
- 590 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Kimberly Goss
RAS
- RAS Name:
- RYAN ELZA,QUIGGINS
- RAS #:
- 1707
- RAS Address:
- 458 WOODMERE DR
- GARLAND, TX 75043
- RAS Phone:
- (214) 370-4520
OWNER
- Owner Name:
- UT Southwestern Medical Center
- Owner Address:
- 5223 Harry Hines Blvd.
- Dallas, Texas 75390
- Owner Phone:
- (214) 648-2400
- Contact Name:
- Juan Guerra
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- HED
- Design Firm Address:
- 15301 Spectrum Dr.
- Addison, Texas 75001
- Design Firm Phone:
- (469) 916-7764
