NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2023023795 Registration Date: 7/17/2023
PROJECT
- Project Name:
- NXP SE Annex P5 Oak Hill
- Project Number:
- TABS2023023795
- Facility Name:
- NXP Semiconductors Oak Hill campus Building A
- Location Address:
- 6501 W. William Cannon
- Austin, TX 78735
- Location County:
- Austin
- Start Date:
- 8/7/2023
- Completion Date:
- 9/15/2023
- Estimated Cost:
- $2,000,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Project is demolishing and renovating an existing cleanroom layout into a new cleanroom design. Primary occupancy is unchanged.
- Square Footage:
- 7,075 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Taylor Hardee
RAS
- RAS Name:
- MARK S,ROBINSON
- RAS #:
- 1561
- RAS Address:
- PO BOX 9063
- AUSTIN, TX 78766
- RAS Phone:
- (512) 905-6005
OWNER
- Owner Name:
- NXP Semiconductors
- Owner Address:
- 6501 W. William Cannon Dr.
- Austin, Texas 78735
- Owner Phone:
- (512) 895-6180
- Contact Name:
- Chris Tondre
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Studio 8 architects
- Design Firm Address:
- 1608 W 5th St Suite 100
- Austin, Texas 78703
- Design Firm Phone:
- (214) 797-8846
