NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2023025072 Registration Date: 8/3/2023
PROJECT
- Project Name:
- GlobalWafers America
- Project Number:
- TABS2023025072
- Facility Name:
- GlobalWafers America
- Location Address:
- 3200 Northgate Drive
- Sherman, TX 75092
- Location County:
- Grayson
- Start Date:
- 11/1/2022
- Completion Date:
- 12/31/2025
- Estimated Cost:
- $1,000,000,000
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Wafer manufacturing facility that makes 300mm silicon wafers that are used to make semiconductor chips. The Facility is comprised of the factory building and multiple other support buildings and utility yards.
- Square Footage:
- 1,330,000 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Inspection Complete
PERSON FILING FORM
- Contact Name:
- Shawna Eskins
RAS
- RAS Name:
- FRED DWAIN,CAWYER
- RAS #:
- 86
- RAS Address:
- 2501 HARBORVIEW BLVD
- ROWLETT, TX 75088
- RAS Phone:
- (972) 285-2445
OWNER
- Owner Name:
- Global Wafers America LLC
- Owner Address:
- 200 FM 1417 West
- Sherman, Texas 75092
- Owner Phone:
- (903) 957-1999
- Contact Name:
- Mark England
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Page Southerland Page, Inc.
- Design Firm Address:
- 1800 Main Street, Suite 123
- Dallas, Texas 75201
- Design Firm Phone:
- 214-522-3900
