NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2024002829 Registration Date: 10/10/2023
PROJECT
- Project Name:
- MicroMetl Office
- Project Number:
- TABS2024002829
- Facility Name:
- MicroMetl Corporation
- Location Address:
- 201 Kodak Blvd
- Longview, TX 75602
- Location County:
- Gregg
- Start Date:
- 7/27/2023
- Completion Date:
- 6/1/2024
- Estimated Cost:
- $175,000
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- The MicroMetl office will consist of 4943 sq ft. Exterior walls and roof will be 26 ga R-Panel. Exterior wainscoting is stone on the front only. Walls are charcoal gray, roof will be white and all trim will be orange.
- Square Footage:
- 4,940 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Tisha Heathman
RAS
- RAS Name:
- JOHN C,TYSON
- RAS #:
- 1605
- RAS Address:
- 2500 WINDMILL LN
- LONGVIEW, TX 75601
- RAS Phone:
- (903) 238-4588
OWNER
- Owner Name:
- Jack Ledford
- Owner Address:
- 201 Kodak Boulevard
- Longview, Texas 75602
- Owner Phone:
- (620) 951-1068
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
Not Assigned
