NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2024003461 Registration Date: 10/18/2023
PROJECT
- Project Name:
- Caliber Collision Center - Pilot Point
- Project Number:
- TABS2024003461
- Facility Name:
- Caliber Collision Center
- Location Address:
- 8600 U.S. 377
- Pilot Point, TX 76258
- Location County:
- Denton
- Start Date:
- 1/18/2024
- Completion Date:
- 2/18/2024
- Estimated Cost:
- $750,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Remodel of existing building into an automobile collison repair and paint facility.
- Square Footage:
- 15,000 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Brian Rumsey
RAS
- RAS Name:
- JEFFREY A,GUTKNECHT
- RAS #:
- 472
- RAS Address:
- 624 UNIVERSITY DR STE 214
- DENTON, TX 76201
- RAS Phone:
- (214) 808-9248
OWNER
- Owner Name:
- National Property Holdings
- Owner Address:
- 3207 S. Sam Houston Pkwy. E., Ste. 100
- Houston, Texas 77047
- Owner Phone:
- (281) 799-9762
- Contact Name:
- Trevor Hudson
TENANT
Not Assigned
DESIGN FIRM
Not Assigned
