NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2024008751 Registration Date: 1/8/2024
PROJECT
- Project Name:
- ICON CNC Products Warehouse
- Project Number:
- TABS2024008751
- Facility Name:
- ICON CNC Products
- Location Address:
- 3401 Pasadena Blvd.
- Pasadena, TX 77506
- Location County:
- Harris
- Start Date:
- 5/1/2024
- Completion Date:
- 8/26/2024
- Estimated Cost:
- $50,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Addition of two restrooms, a mop sink, an interior layer of insulation & corrugated metal to the walls and ceiling, HVAC system and ductwork.
- Square Footage:
- 5,400 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Registered
PERSON FILING FORM
- Contact Name:
- Cathleen Hart
RAS
Not Assigned
OWNER
- Owner Name:
- Pasadena 5 21 Venture LP
- Owner Address:
- 2110 Grandway Drive
- Katy, Texas 77503
- Owner Phone:
- (713) 539-9089
- Contact Name:
- Brad Maxcey
TENANT
- Tenant Name:
- Dan Henderson
- Tenant Phone:
- 409-261-4018
DESIGN FIRM
- Design Firm Name:
- J. Morales, Inc.
- Design Firm Address:
- 102 MUNGER ST
- PASADENA, Texas 77506
- Design Firm Phone:
- (281) 610-6626
