NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2024012662 Registration Date: 2/28/2024
PROJECT
- Project Name:
- HYBRID MANUFACTURING TECHNOLOGIES
- Project Number:
- TABS2024012662
- Facility Name:
- HYBRID MANUFACTURING TECHNOLOGIES
- Location Address:
- 1600 CORPORATE DR #STE. 111
- Mckinney, TX 75069
- Location County:
- Collin
- Start Date:
- 3/1/2024
- Completion Date:
- 5/30/2024
- Estimated Cost:
- $800,000
- Type of Work:
- Additions to Existing Building
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- INTERIOR REMODEL AND ADDITION
- Square Footage:
- 7,280 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Brandon Quimbey
RAS
Not Assigned
OWNER
- Owner Name:
- FREEDOM FLEX LLC
- Owner Address:
- 4708 FM 1417
- SHERMAN, Texas 75092
- Owner Phone:
- (903) 813-1415
- Contact Name:
TENANT
- Tenant Name:
- HYBRID MANUFACTURING TECHNOLOGIES
- Tenant Phone:
- (214) 530-2334
DESIGN FIRM
- Design Firm Name:
- INTEGRATED DESIGN & BIM SOLUTIONS LLC
- Design Firm Address:
- 5000 CEDAR ELM DR
- MCKINNEY, Texas 75070
- Design Firm Phone:
- (214) 930-1216
