NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2024012689 Registration Date: 2/29/2024
PROJECT
- Project Name:
- Modifications to IKO Metals Ennis factory building
- Project Number:
- TABS2024012689
- Facility Name:
- IKO Metals Ennis
- Location Address:
- 4400 Sterilite Drive
- Ennis, TX 75119
- Location County:
- Ellis
- Start Date:
- 3/1/2024
- Completion Date:
- 8/31/2024
- Estimated Cost:
- $2,800,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Modification of concrete for process equipment, installation of office/breakroom area, new doorways & driveways, and structural steel for process components. Approx. 43,000 sqft of total work area.
- Square Footage:
- 43,000 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Inspection Complete
PERSON FILING FORM
- Contact Name:
- Jeffery Kelley
RAS
- RAS Name:
- JEFFERY L,KELLEY
- RAS #:
- 55
- RAS Address:
- 780 N WATTERS RD STE 150
- ALLEN, TX 75013
- RAS Phone:
- (972) 346-1869
OWNER
- Owner Name:
- IKO Metals USA Inc.
- Owner Address:
- 4400 Sterilite Drive
- Ennis, Texas 75119
- Owner Phone:
- 254-266-1672
- Contact Name:
- Jason Chiselbrook
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Salas O' Brien
- Design Firm Address:
- 2201 N. Central Expressway, Suite 240
- Richardson, Texas 75080
- Design Firm Phone:
- 972-764-8630
