NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2024013511 Registration Date: 3/11/2024
PROJECT
- Project Name:
- UTA Arlington - Interior MRI Suite Finish Out
- Project Number:
- TABS2024013511
- Facility Name:
- Science & Engineering Innovation & Research Building
- Location Address:
- 655 W. Mitchell St.
- Arlington, TX 76010
- Location County:
- Tarrant
- Start Date:
- 4/8/2024
- Completion Date:
- 9/16/2024
- Estimated Cost:
- $350,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- The project involves the interior finish out of the existing shell space. The area will accommodate a new MRI Procedure Room, Control Room, Equipment Room, Offices, Exam Rooms, and the support spaces.
- Square Footage:
- 3,700 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Kyle Markee
RAS
- RAS Name:
- KIMBERLY J,GOSS
- RAS #:
- 51
- RAS Address:
- 12720 HILLCREST RD STE 1040
- DALLAS, TX 75230
- RAS Phone:
- (214) 348-7758
OWNER
- Owner Name:
- Troy Yoder
- Owner Address:
- 601 W. Mitchell St.
- Arlington, Texas 76012
- Owner Phone:
- (817) 272-2396
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Fry Construction
- Design Firm Address:
- 3212 Commander Drive
- Carrollton, Texas 75006
- Design Firm Phone:
- (214) 732-9611
