NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2024017680 Registration Date: 5/3/2024
PROJECT
- Project Name:
- Sleep Technologies TI
- Project Number:
- TABS2024017680
- Facility Name:
- One Addison Place
- Location Address:
- 4900 Arapaho Road, Suite #300, Addison, Texas
- Addison, TX 75001
- Location County:
- Dallas
- Start Date:
- 4/15/2024
- Completion Date:
- 7/15/2024
- Estimated Cost:
- $1,100,000
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Tenant infill within an existing 4 story mixed use building. The new build out will be utilized for mercantile, light assemblage (fabrication), and office space.
- Square Footage:
- 8,258 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Registered
PERSON FILING FORM
- Contact Name:
- Joshua Barnes
RAS
Not Assigned
OWNER
- Owner Name:
- Bob Duncan
- Owner Address:
- 4900 Arapaho Road Suite 300
- Addison, Texas 75001
- Owner Phone:
- (972) 839-8428
- Contact Name:
- Bob Duncan
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- BRNS Design
- Design Firm Address:
- 1301 Solana Blvd Suite 5200
- Westlake, Texas 76262
- Design Firm Phone:
- (817) 675-4905
