NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2024020756 Registration Date: 6/13/2024
PROJECT
- Project Name:
- Siemens Project Vanguard Building Addition
- Project Number:
- TABS2024020756
- Facility Name:
- Powder Coat Building
- Location Address:
- 501 Fountain Parkway
- Grand Prairie, TX 75050
- Location County:
- Tarrant
- Start Date:
- 2/2/2023
- Completion Date:
- 7/12/2024
- Estimated Cost:
- $4,800,000
- Type of Work:
- Additions to Existing Building
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Addition to the existing facility to install powder coat equipment
- Square Footage:
- 23,000 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Dustin Weida
RAS
- RAS Name:
- MARCELA ABADI,RHOADS
- RAS #:
- 240
- RAS Address:
- 17776 PRESTON RD STE 210
- DALLAS, TX 75252
- RAS Phone:
- (214) 403-8714
OWNER
- Owner Name:
- Siemens Corporation
- Owner Address:
- 170 Wood Ave South
- Iselin, New Jersey 08830
- Owner Phone:
- (469) 971-3594
- Contact Name:
- Sajjad Khan
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- BHDP Architecture
- Design Firm Address:
- 302 West Third St.
- Cincinnati, Ohio 45202
- Design Firm Phone:
- (901) 581-0881
