NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2025001022 Registration Date: 9/16/2024
PROJECT
- Project Name:
- Siemens Manufacturing Facility Suite 140 & Wiring Remodel
- Project Number:
- TABS2025001022
- Facility Name:
- 501 Fountain Parkway
- Location Address:
- 501 Fountain Parkway, Suite 140
- Grand Prairie, TX 75050
- Location County:
- Dallas
- Start Date:
- 9/9/2024
- Completion Date:
- 9/27/2024
- Estimated Cost:
- $100,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Renovation of Northwestern office space, new flooring, wall finish and ceiling to match adjacent areas. Relocating existing lighting fixtures
- Square Footage:
- 2,000 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Marcela Rhoads
RAS
Not Assigned
OWNER
- Owner Name:
- Siemens
- Owner Address:
- 200 Wood Avenue South, Suite 200
- Iseline, New Jersey 08830
- Owner Phone:
- (512) 924-4132
- Contact Name:
- Joe Retoff
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- BHDP Architecture
- Design Firm Address:
- 302 West Third Street, Suite 500
- Cincinnati, Ohio 45202
- Design Firm Phone:
- 513-527-0223
