NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2025004708 Registration Date: 11/3/2024
PROJECT
- Project Name:
- Equipment Pit 1.824
- Project Number:
- TABS2025004708
- Facility Name:
- Microelectronics and Engineering Research Building
- Location Address:
- 10100 Harry Ransom Trail
- Austin, TX 78758
- Location County:
- Travis
- Start Date:
- 1/4/2025
- Completion Date:
- 3/10/2025
- Estimated Cost:
- $96,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project involves public funds, public land, or is a Federally funded roadway project.
- Scope of Work:
- A 4' X 4' cut out of the concrete floor will be provided for a new piece of equipment. In addition, a hoist crane will be installed above the equipment. The project square footage is 430 sq/ft.
- Square Footage:
- 430 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Steve Zoerner
RAS
- RAS Name:
- STEVE R,ZOERNER
- RAS #:
- 1163
- RAS Address:
- 378 NICHOLAS LN
- DRIFTWOOD, TX 78619
- RAS Phone:
- (512) 731-9270
OWNER
- Owner Name:
- Nathaniel Atkins
- Owner Address:
- 1301 E Dean Keeton St FC1, Floor 3
- Austin, Texas 78712
- Owner Phone:
- (512) 373-5849
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- BSA LifeStructures
- Design Firm Address:
- 1600 S 1st St Suite 150
- Austin, Texas 78704
- Design Firm Phone:
- (512) 531-9075
