NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2025006201 Registration Date: 11/22/2024
PROJECT
- Project Name:
- DuraPlas North Warehouse
- Project Number:
- TABS2025006201
- Facility Name:
- Duraplas
- Location Address:
- 16410 Midway Rd
- Addison, TX 75001
- Location County:
- Dallas
- Start Date:
- 11/1/2024
- Completion Date:
- 3/15/2025
- Estimated Cost:
- $200,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Demolish existing office/restroom area at the south end of the warehouse and build new restrooms and breakroom
- Square Footage:
- 85,434 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Barbara Caires
RAS
- RAS Name:
- CONNIE,FLEMING
- RAS #:
- 140
- RAS Address:
- PO BOX 1657
- BRIDGEPORT, TX 76426
- RAS Phone:
- (817) 319-9801
OWNER
- Owner Name:
- MaxiLift
- Owner Address:
- 16400 Midway Rd
- Addison, Texas 75001
- Owner Phone:
- (469) 545-1797
- Contact Name:
- Scott Rake
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Alliance Architects, Inc.
- Design Firm Address:
- 1600 N. Collins Blvd, Ste 1000
- Richardson, Texas 75080
- Design Firm Phone:
- (972) 233-0400
