NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2025007637 Registration Date: 12/13/2024
PROJECT
- Project Name:
- NXP FMCS Site Side Replacement-Fire Rated Penetrations
- Project Number:
- TABS2025007637
- Facility Name:
- NXP USA INC
- Location Address:
- 6501 W William Cannon Dr
- Austin, TX 78735
- Location County:
- Travis
- Start Date:
- 1/30/2025
- Completion Date:
- 3/1/2025
- Estimated Cost:
- $115,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Providing the design for approximating (16) fire-rated wall penetrations for FMCS cabling related to the FMCS site side replacement project.
- Square Footage:
- 21,000 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Max Genet
RAS
- RAS Name:
- MARK S,ROBINSON
- RAS #:
- 1561
- RAS Address:
- 8213A SHOAL CREEK BLVD STE 102
- AUSTIN, TX 78757
- RAS Phone:
- (512) 905-6005
OWNER
- Owner Name:
- NXP USA
- Owner Address:
- 6501 W William Cannon Dr
- Austin, Texas 78735
- Owner Phone:
- (979) 837-9113
- Contact Name:
- Rudra Konidena
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Fuse Architecture Studio
- Design Firm Address:
- 1005 East St Elmo Bldg 4
- Austin, Texas 78745
- Design Firm Phone:
- (512) 992-1520
