NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2025010922 Registration Date: 2/3/2025
PROJECT
- Project Name:
- Kirby Smith Machinery, Inc. - Van Alstyne, TX
- Project Number:
- TABS2025010922
- Facility Name:
- Kirby Smith Machinery, Inc.
- Location Address:
- Lot 1, Block A
- Van Alstyne, TX 75495
- Location County:
- Grayson
- Start Date:
- 5/24/2025
- Completion Date:
- 4/26/2026
- Estimated Cost:
- $10,900,000
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Project consists of site development and two new structures consisting of one ground-up metal building to house the office and shop areas, and an adjacent metal bldg for wash down.
- Square Footage:
- 29,619 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Jay Heilman
RAS
- RAS Name:
- JAMES J,HEILMAN
- RAS #:
- 48
- RAS Address:
- 722 W EULESS BLVD
- EULESS, TX 76040
- RAS Phone:
- (817) 908-8092
OWNER
- Owner Name:
- Kirby-Smith Machinery Inc.
- Owner Address:
- 6715 W Reno Avenue
- Oklahoma City, Oklahoma 76127
- Owner Phone:
- (405) 403-7718
- Contact Name:
- Jeff Weller
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Parkway C&A LP
- Design Firm Address:
- 1000 Civic Circle
- Lewisville, Texas 75067
- Design Firm Phone:
- 972-221-1979
