NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2025013227 Registration Date: 3/3/2025
PROJECT
- Project Name:
- Omnisource - Retail Building 3
- Project Number:
- TABS2025013227
- Facility Name:
- Omnisource - Retail Building 3
- Location Address:
- 401 Riverbend Way
- Dayton, TX 77535
- Location County:
- Liberty
- Start Date:
- 7/1/2025
- Completion Date:
- 11/30/2025
- Estimated Cost:
- $881,450
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- 4,500 SF GROUND-UP CONSTRUCTION OF PEMB RETAIL BUILDING WITH ASSOCIATED SITE IMPROVEMENTS.
- Square Footage:
- 4,500 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Stefano Poisl
RAS
- RAS Name:
- ERNEST G,TAYLOR
- RAS #:
- 492
- RAS Address:
- 239 MAGNOLIA WAY
- LEAGUE CITY, TX 77573
- RAS Phone:
- (281) 796-4415
OWNER
- Owner Name:
- Omnisource
- Owner Address:
- 7575 WEST JEFFERSON BLVD
- Fort Wayne, Indiana 76804
- Owner Phone:
- 260-423-3937
- Contact Name:
- Kyle Ebers
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Goree Architects
- Design Firm Address:
- 5151 San Felipe St. Suite 1700
- Houston, Texas 77056
- Design Firm Phone:
- 832.295.6321
