NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2025016070 Registration Date: 4/7/2025
PROJECT
- Project Name:
- UTSA BSE Sterilizer Install Rm 3.304A
- Project Number:
- TABS2025016070
- Facility Name:
- BSE Building
- Location Address:
- One UTSA Circle
- San Antonio, TX 78249
- Location County:
- Bexar
- Start Date:
- 5/15/2025
- Completion Date:
- 11/1/2025
- Estimated Cost:
- $425,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project involves public funds, public land, or is a Federally funded roadway project.
- Scope of Work:
- Removal of existing epoxy flooring, base, and gypsum wall, and gypsum board ceiling / devices at new location for dry heat sterilizer. New patching of floor, devices, control panel, gypsum board patching, and ceiling work included.
- Square Footage:
- 452 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Raelynn Ochoa
RAS
- RAS Name:
- PETER F,GROJEAN
- RAS #:
- 75
- RAS Address:
- 218 MAVERICK ST
- SAN ANTONIO, TX 78212
- RAS Phone:
- (210) 271-1014
OWNER
- Owner Name:
- UNIVERSITY OF TEXAS SYSTEM
- Owner Address:
- 210 W 7TH ST
- AUSTIN, Texas 78701
- Owner Phone:
- (210) 219-9846
- Contact Name:
- Vladimir Andzic
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Chesney Morales Partners
- Design Firm Address:
- 4901 Broadway St.
- San Antonio, Texas 78209
- Design Firm Phone:
- (210) 828-9481
