NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2025019722 Registration Date: 5/23/2025
PROJECT
- Project Name:
- Parts Warehouse
- Project Number:
- TABS2025019722
- Facility Name:
- Blake Utter Ford
- Location Address:
- 3416 Ansley Blvd
- Denison, TX 75021
- Location County:
- Grayson
- Start Date:
- 6/30/2025
- Completion Date:
- 6/30/2026
- Estimated Cost:
- $750,000
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Parts Warehouse, with 2nd floor mezzanine for the storage of large bulk car parts. No public access. Employee Work Area only.
- State Lease #:
- undefined
- Square Footage:
- 9,200 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Bruce Green
RAS
- RAS Name:
- JEFFERY L,KELLEY
- RAS #:
- 55
- RAS Address:
- 780 N WATTERS RD STE 150
- ALLEN, TX 75013
- RAS Phone:
- (972) 422-5384
OWNER
- Owner Name:
- Utter Properties
- Owner Address:
- 2525 Texoma Parkway
- Sherman, Texas 75090
- Owner Phone:
- (903) 814-5545
- Contact Name:
- David Pryor
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- BWG Architecture
- Design Firm Address:
- 218 Emily Ln
- Van Alstyne, Texas 75495
- Design Firm Phone:
- 903-815-9273
