NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2025022668 Registration Date: 7/2/2025
PROJECT
- Project Name:
- Science building Level 4 Finish Out – Lab Wing
- Project Number:
- TABS2025022668
- Facility Name:
- The University of Texas Dallas – Science Building
- Location Address:
- 2600 Rufford
- Richardson, TX 75080
- Location County:
- Dallas
- Start Date:
- 7/2/2025
- Completion Date:
- 2/20/2026
- Estimated Cost:
- $5,400,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project involves public funds, public land, or is a Federally funded roadway project.
- Scope of Work:
- Interior finish out an existing building. No exterior scope. No restroom scope
- Square Footage:
- 18,965 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Marcella Garcia
RAS
- RAS Name:
- BLAIR,BAKER
- RAS #:
- 19
- RAS Address:
- 539 W COMMERCE ST SUITE 180
- DALLAS, TX 75208
- RAS Phone:
- (800) 880-6986
OWNER
- Owner Name:
- UTD - Carmen Wright
- Owner Address:
- 2600 Rufford Av.
- Richardson, Texas 75080
- Owner Phone:
- 972.883.6963
- Contact Name:
- Cameron Wright
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Stantec Architecture Inc.
- Design Firm Address:
- 6080 Tennyson Parkway Suite 200
- Plano, Texas 75024
- Design Firm Phone:
- (214) 473-2452
