NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2025023128 Registration Date: 7/9/2025
PROJECT
- Project Name:
- CT & S Metal Works Office and Workshop
- Project Number:
- TABS2025023128
- Facility Name:
- CT & S Metal Works Office and Workshop
- Location Address:
- 1500 Edgefield Way
- Cedar Hill, TX 75104
- Location County:
- Dallas
- Start Date:
- 8/26/2025
- Completion Date:
- 8/26/2026
- Estimated Cost:
- $3,336,760
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- A pre-engineered metal building for office and workshop. Scope of work will include site development including driveways, parking, concrete foundation, PEMB construction, interior finishes, mechanical, electrical and plumbing works
- Square Footage:
- 25,442 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Registered
PERSON FILING FORM
- Contact Name:
- Sohail Ahmed
RAS
- RAS Name:
- CLINTON L,COULTAS
- RAS #:
- 1573
- RAS Address:
- 3905 TITAN TRL
- DENTON, TX 76209
- RAS Phone:
- (940) 240-0491
OWNER
- Owner Name:
- Ali Rizvi
- Owner Address:
- 1513 Maryland Drive
- Irving, Texas 75061
- Owner Phone:
- (913) 219-5380
- Contact Name:
- Ali Rizvi
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- S2N2 Architects LLC
- Design Firm Address:
- 1529 Hudnall Farm Road
- Keller, Texas 76248
- Design Firm Phone:
- (682) 401-2140
