NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2025024335 Registration Date: 7/24/2025
PROJECT
- Project Name:
- Break Room Addition
- Project Number:
- TABS2025024335
- Facility Name:
- Azteca Milling
- Location Address:
- 501 W Chapin St.
- Edinburg, TX 78541
- Location County:
- Hidalgo
- Start Date:
- 7/28/2025
- Completion Date:
- 1/28/2026
- Estimated Cost:
- $387,000
- Type of Work:
- Additions to Existing Building
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- 1039 Sq. Ft. Will be added to the existing building. Foundation for new addition, framing new walls, new roof, electrical, plumbing, mechanical work, paint, tile work.
- Square Footage:
- 1,039 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Jose ricardo Guerrero
RAS
- RAS Name:
- JOSE RICARDO,GUERRERO
- RAS #:
- 1426
- RAS Address:
- 709 ALAMEDA ST
- SAN JUAN, TX 78589
- RAS Phone:
- (956) 227-4178
OWNER
- Owner Name:
- Azteca Milling LP
- Owner Address:
- 5601 Executive Dr. Ste. 650
- Irving, Texas 75038
- Owner Phone:
- (956) 227-6547
- Contact Name:
- Miguel Segura
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Jona Valencia Design and Construction
- Design Firm Address:
- 601 S 23rd St. Ste. 600
- McAllen, Texas 78501
- Design Firm Phone:
- (956) 900-5423
