NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2025025301 Registration Date: 8/6/2025
PROJECT
- Project Name:
- Foundry Commercial - 4000 Horizon - Building 1 - Rexi TI
- Project Number:
- TABS2025025301
- Facility Name:
- Foundry Commercial - 4000 Horizon - Building 1
- Location Address:
- 4300 Horizon Way
- Irving, TX 75063
- Location County:
- Dallas
- Start Date:
- 8/10/2025
- Completion Date:
- 10/25/2025
- Estimated Cost:
- $1,200,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- A fully conditioned 53,152 SF distribution facility with the addition of a multiuser restroom.
- Square Footage:
- 53,152 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Fernando Andrade
RAS
- RAS Name:
- STEPHEN D,MACPHIE
- RAS #:
- 307
- RAS Address:
- 4210 E MUNICIPAL DRIVE APT 6
- LUBBOCK, TX 79403
- RAS Phone:
- (806) 790-9227
OWNER
- Owner Name:
- Foundry Commerical Acquisitions LLC
- Owner Address:
- 3500 Maple Avenue - Suite #250
- Dallas, Texas 75219
- Owner Phone:
- (214) 601-2009
- Contact Name:
- Heather Barksdale
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- GSR Andrade Architects
- Design Firm Address:
- 2001 North Lamar Street, Suite #400
- Dallas, Texas 75202
- Design Firm Phone:
- (214) 824-7040
