NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2026008869 Registration Date: 12/23/2025
PROJECT
- Project Name:
- SAS FAB1 Waste Tank Expansion
- Project Number:
- TABS2026008869
- Facility Name:
- Samsung Austin Semiconductor
- Location Address:
- 12100 Samsung Blvd
- Austin, TX 78754
- Location County:
- Travis
- Start Date:
- 10/15/2025
- Completion Date:
- 12/15/2029
- Estimated Cost:
- $12,000,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Scope consists of issuing IFC set and providing CA for a permanent swing tank within a new containment area connected to the original FAB1 FWW and AWW transfer tank containment.
- Square Footage:
- 3,750 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Project Registered
PERSON FILING FORM
- Contact Name:
- Max Genet
RAS
- RAS Name:
- MARK S,ROBINSON
- RAS #:
- 1561
- RAS Address:
- 8213A SHOAL CREEK BLVD SUITE 102
- AUSTIN, TX 78757
- RAS Phone:
- (512) 459-2121
OWNER
- Owner Name:
- SAMSUNG AUSTIN SEMICONDUCTOR
- Owner Address:
- 12100 Samsung Blvd
- Austin, Texas 78754
- Owner Phone:
- (512) 672-1000
- Contact Name:
- Eric Gallegos
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Fuse Architecture Studio
- Design Firm Address:
- 1005 E St Elmo Rd Bldg 4
- Austin, Texas 78745
- Design Firm Phone:
- (971) 386-7665
