NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2026009618 Registration Date: 1/8/2026
PROJECT
- Project Name:
- Royalty Barber Studio
- Project Number:
- TABS2026009618
- Facility Name:
- Royalty Barber Studio
- Location Address:
- 1700 Northwood Drive
- Marble Falls, TX 78654
- Location County:
- Burnet
- Start Date:
- 1/14/2026
- Completion Date:
- 4/1/2026
- Estimated Cost:
- $85,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Reinforce all exterior walls & Trusses. Install new roof. Install exterior hardy siding. New windows, doors, electrical wiring, plumbing & HVAC. Insulation, 5/8 in sheetrock on walls & ceilings. Total paint. Grind & polish concrete floor.
- Square Footage:
- 1,400 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Registered
PERSON FILING FORM
- Contact Name:
- Arthur Sanchez
RAS
- RAS Name:
- JOSEPH,HUSBAND
- RAS #:
- 27
- RAS Address:
- 1108 LAVACA STREET STE 110-313
- AUSTIN, TX 78701
- RAS Phone:
- (512) 238-8675
OWNER
- Owner Name:
- Arthur Sanchez
- Owner Address:
- 2700 Park Ridge Dr.
- Marble Falls, Texas 78654
- Owner Phone:
- (512) 715-4039
- Contact Name:
- Arthur Sanchez
TENANT
Not Assigned
DESIGN FIRM
Not Assigned
