NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2026009699 Registration Date: 1/9/2026
PROJECT
- Project Name:
- AR Machining Renovation
- Project Number:
- TABS2026009699
- Facility Name:
- AR Machining
- Location Address:
- 636 W Front St.
- Hutto, TX 78634
- Location County:
- Williamson
- Start Date:
- 3/16/2026
- Completion Date:
- 3/16/2028
- Estimated Cost:
- $300,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Tenant improvement including small demolition scope, placement of new interior partition walls, HVAC and MEP improvements, finish selections.
- Square Footage:
- 1,772 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Project Registered
PERSON FILING FORM
- Contact Name:
- Audrey Owen
RAS
- RAS Name:
- STEVE R,ZOERNER
- RAS #:
- 1163
- RAS Address:
- STE C400 NO 545 166 HARGRAVES DR
- AUSTIN, TX 78737
- RAS Phone:
- (512) 731-9270
OWNER
- Owner Name:
- Matthew Dobias
- Owner Address:
- 632 W. Front St.
- Hutto, Texas 78634
- Owner Phone:
- 512-759-2003
- Contact Name:
- Matthew Dobias
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Levy Dykema
- Design Firm Address:
- 620 Congress Ave
- Austin, Texas 78701
- Design Firm Phone:
- (512) 342-9177
