NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2026011591 Registration Date: 2/3/2026
PROJECT
- Project Name:
- Made in America Manufacturing
- Project Number:
- TABS2026011591
- Facility Name:
- ATX 130 Bldg. 2
- Location Address:
- 633 Moores Crossing Blvd. Bldg. 2
- Del Valle, TX 78617
- Location County:
- Travis
- Start Date:
- 3/16/2026
- Completion Date:
- 6/29/2026
- Estimated Cost:
- $800,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Tenant office build out to a previously permitted office / warehouse space.
- Square Footage:
- 77,813 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Mollie Farrimond
RAS
- RAS Name:
- DAVID C,DEMING
- RAS #:
- 129
- RAS Address:
- 16222 CRYSTAL HILLS DR
- AUSTIN, TX 78737
- RAS Phone:
- (512) 940-4226
OWNER
- Owner Name:
- APG Moores Crossing Owner
- Owner Address:
- 343 S. Highway 101, Suite 200
- Solana Beach, California 92075
- Owner Phone:
- (858) 472-4986
- Contact Name:
- Caitlin Little
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- S. Tipton Studio
- Design Firm Address:
- 3724 Executive Center Dr Suite 110
- Austin, Texas 78731
- Design Firm Phone:
- (210) 289-0145
