NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2026012186 Registration Date: 2/10/2026
PROJECT
- Project Name:
- Texas A&M Semiconductor Institute
- Project Number:
- TABS2026012186
- Facility Name:
- Texas A&M Semiconductor Institute
- Location Address:
- 741 RELLIS Parkway
- Bryan, TX 77807
- Location County:
- Brazos
- Start Date:
- 3/1/2026
- Completion Date:
- 1/13/2028
- Estimated Cost:
- $144,900,000
- Type of Work:
- New Construction
- Type of Funds:
- This project involves public funds, public land, or is a Federally funded roadway project.
- Scope of Work:
- Construction of a new approximately 120,000 square foot building for the Texas A&M Semiconductor Institute on the RELLIS campus, including associated sitework,
- Square Footage:
- 90,000 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Registered
PERSON FILING FORM
- Contact Name:
- Nathaniel Walsh
RAS
- RAS Name:
- ROB ROY,PARNELL
- RAS #:
- 184
- RAS Address:
- 251 MCKELLAR RD
- DRIPPING SPRINGS, TX 78620
- RAS Phone:
- (512) 784-3699
OWNER
- Owner Name:
- Texas A&M University System
- Owner Address:
- 301 Tarrow Street
- College Station, Texas 77840
- Owner Phone:
- 979-458-7063
- Contact Name:
- Ashley Ordener Cottrell
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Stantec Architecture, Inc
- Design Firm Address:
- 910 Louisiana Street Suite 2600
- Houston, Texas 77002
- Design Firm Phone:
- 713-548-5700
