NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2026014415 Registration Date: 3/6/2026
PROJECT
- Project Name:
- Welding Shop
- Project Number:
- TABS2026014415
- Facility Name:
- Sigma Design & Fabrication
- Location Address:
- 519 Oak Ave
- Highland, TX 7756
- Location County:
- Harris
- Start Date:
- 5/1/2026
- Completion Date:
- 10/1/2026
- Estimated Cost:
- $500,000
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- 11,900 SQFT Warehouse, Detention pond, and Light parking.
- Square Footage:
- 11,900 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Registered
PERSON FILING FORM
- Contact Name:
- Sorour Baghernejad
RAS
- RAS Name:
- SOROUR,BAGHERNEJAD
- RAS #:
- 1706
- RAS Address:
- UNIT 4301 14695 BRIAR FOREST DR
- HOUSTON, TX 77077
- RAS Phone:
- (713) 973-1400
OWNER
- Owner Name:
- Sigma Design & Fabrication LLC
- Owner Address:
- 1807 Radcliffe Street
- Houston, Texas 77007
- Owner Phone:
- 979-571-3556
- Contact Name:
- David Alejandro Lopez Carretero
TENANT
Not Assigned
DESIGN FIRM
Not Assigned
