NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2026015748 Registration Date: 3/24/2026
PROJECT
- Project Name:
- Advanced Manufacturing District Phase I
- Project Number:
- TABS2026015748
- Facility Name:
- COEP Advanced Manufacturing
- Location Address:
- 310 George Perry
- El Paso, TX 79925
- Location County:
- El Paso
- Start Date:
- 5/6/2026
- Completion Date:
- 5/6/2027
- Estimated Cost:
- $20,000,000
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Construction of a 50,000 s.f. building 10,000 s.f. of administrative space and 40,000 tenant shell space as part of Phase I development that will lead to a larger Manufacturing District. Additional work includes, but not limited to, HVAC, Plumbing, E
- Square Footage:
- 50,000 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Registered
PERSON FILING FORM
- Contact Name:
- Steven Dominguez
RAS
- RAS Name:
- ECKHARD K,FENNIG
- RAS #:
- 476
- RAS Address:
- 5788 N MESA ST
- EL PASO, TX 79912
- RAS Phone:
- (915) 845-1716
OWNER
- Owner Name:
- City of El Paso
- Owner Address:
- 300 N. Campbell Street
- El Paso, Texas 79901
- Owner Phone:
- (915) 212-7395
- Contact Name:
- Zuhey Monge
TENANT
Not Assigned
DESIGN FIRM
Not Assigned
