NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2026015815 Registration Date: 3/24/2026
PROJECT
- Project Name:
- Nitrogen Generation Site Improvements
- Project Number:
- TABS2026015815
- Facility Name:
- JOHNSON & JOHNSON -ETHICON
- Location Address:
- 3348 Pulliam Street, San Angelo
- San Angelo, TX 76905
- Location County:
- Tom Green
- Start Date:
- 4/14/2026
- Completion Date:
- 11/1/2026
- Estimated Cost:
- $2,900,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Exterior Concrete Equipment Pad, with Walkways, Elec. Power/Lighting, UG Site Plumbing and Structural Supports for a Nitrogen Generation System. The Nitrogen Generation System is not in scope. No Interior Scope.
- Square Footage:
- 13,000 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Registered
PERSON FILING FORM
- Contact Name:
- Natalie Bunkley
RAS
- RAS Name:
- SUSAN D,GREGONIS
- RAS #:
- 1077
- RAS Address:
- 4125 SHEFFLERA DR
- SAN ANGELO, TX 76904
- RAS Phone:
- (325) 947-3400
OWNER
- Owner Name:
- Ethicon/ Johnson & Johnson
- Owner Address:
- 3348 Pulliam Street
- San Angelo, Texas 76905
- Owner Phone:
- (325) 482-5560
- Contact Name:
- Joseph Anyanda
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Integrated Project Services (IPS)
- Design Firm Address:
- 111 Woodcrest Rd. Suite 100
- Cherry Hill, New Jersey 08003
- Design Firm Phone:
- (610) 828-4090
