NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2026016720 Registration Date: 4/2/2026
PROJECT
- Project Name:
- East Penn Expansion
- Project Number:
- TABS2026016720
- Facility Name:
- East Penn Manufacturing Co
- Location Address:
- 5101 Wendland Road
- Temple, TX 76504
- Location County:
- Bell
- Start Date:
- 4/20/2026
- Completion Date:
- 11/30/2027
- Estimated Cost:
- $60,000,000
- Type of Work:
- Additions to Existing Building
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Expansion of existing building. Approximate 176,333 SF conditioned pre-engineered metal building addition to an existing manufacturing facility.
- Square Footage:
- 176,333 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Registered
PERSON FILING FORM
- Contact Name:
- Taylor Stumberg
RAS
- RAS Name:
- STEVEN E,RINEHART
- RAS #:
- 1141
- RAS Address:
- 445 E CTX EXPWY SUITE 7
- HARKER HEIGHTS, TX 76548
- RAS Phone:
- (254) 690-1186
OWNER
- Owner Name:
- EAST PENN MANUFACTURING CO
- Owner Address:
- 5101 Wendland Road
- Temple, Texas 76504
- Owner Phone:
- 254-778-4696
- Contact Name:
- Michael Schittler
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Pillar Architecture Studio
- Design Firm Address:
- 800 S Austin Ave
- Georgetown, Texas 78626
- Design Firm Phone:
- (512) 768-0285
